KARA
i
_RM_EN_1-1
w w w . l - a c o u s t i c s . c o m
27
4.
Position KARAi#1 upside down and attach it to the M-BUMPi by driving four self-locking M6 hex bolts (included in
the M-BUMPi package) into the KARAi#1 bottom link holes and the M-BUMPi link holes (5 mm hex bit, 10 mm
hex key, 5 N.m/45 in.lb
f
).
On each angle arm, select the angle hole corresponding to the chosen site angle [9.2.2].
The angles corresponding to the different holes are detailed in Figure 21.
Figure 22: Attaching KARAi#1 to M-BUMPi (front extension configuration example)
IMPORTANT
Full view
Rear bolt detailed view
Front bolt detailed view
Summary of Contents for KARAi
Page 1: ...KARAi rigging manual EN ...