KIVA-SB15
m
_RM_EN_1.1
w w w . l - a c o u s t i c s . c o m
15
Attaching a shackle or CLAMP250
PROCEDURE C
1.
Refer to
SOUNDVISION
modeling to identify the hole number that corresponds to the targeted tilt angle.
KIBU-SB hole numbering on the side of the SB15m
KIBU-SB hole numbering on the side of the KIVA
2.
Attach a shackle or a CLAMP250 to the identified hole, by driving the pierced bolt.
3.
Secure the pierced bolt with the safety pin.
4.
With a CLAMP250, install safety slings between the KIBU-SB and the truss.
PROCEDURE C
A shackle being attached on the KIBU-SB.
2.a.
A CLAMP250 being attached on the KIBU-SB.
2.b.
Safety pin mechanism on shackles.