ARCSWIFO_RM_EN_1-0
w w w . l - a c o u s t i c s . c o m
7
7
7
7
3
3
3
3
SYSTEM
SYSTEM
SYSTEM
SYSTEM SET
SET
SET
SET----UP
UP
UP
UP
Dismantling an array
Apply the associated set-up procedure in reversed order.
Independent or mixed
This document only deals with independent rigging of the SB18m subwoofer enclosure.
When using the SB18m enclosure as a companion to a main system, some combined configurations will imply
the set-up of mixed arrays. At this point, it is especially the case of ARCS
®
WIDE/SB18m or
ARCS
®
FOCUS/SB18m arrays. Always refer to the rigging manual of the main system or enclosure to get
acquainted with the rigging procedures specific to the mixed main/sub arrays.
Cardioid configuration
The cardioid configuration is an array of 4 subwoofers with 1 reversed element.
Refer to the subwoofer
user manual
for details about the CARDIOID operating mode.
Any of the following arrangements can be set in cardioid configuration.
3.1
Ground-stacking
Vertical stacked on SB18m
Attach the enclosures one after the other, on top of each other (logo down)
Refer to PROCEDURE
A
to lock the SB18MRIG bars
Block
Set vertical stacks, side by side, one after the other, by attaching the
enclosures on top of each other (logo down)
Refer to PROCEDURE
A
to lock the SB18MRIG bars
Horizontal & On-end
Place the enclosures side by side
