KUDO_RM_ML_1.0
w w w . l - a c o u s t i c s . c o m
11 en
EN
2.
On each KUDO
®
enclosure, adjust the K-LOUVER
®
panels (see the
‘‘KUDO
®
’’ user manual
).
3.
On each KUDO
®
enclosure, remove the 8 BLP.
4.
On both sides of each KUDO
®
enclosure, push forward the rotating arm tab (accessible in the handle pocket) and
secure the front rigging point using the corresponding BLP.
Figure 8: Securing the front rigging points
5.
Align all KUDO
®
enclosure front rigging points (do not attach).
6.
On both sides of each KUDO
®
enclosure, push out the rotating arm and attach the rear inter-enclosure BLP (do not
pre-select angle).
Figure 9: Attaching the rear inter-enclosure BLP (angle selection and front rigging points are not secured)