KUDO_RM_ML_1.0
w w w . l - a c o u s t i c s . c o m
19 en
EN
6.
Select the angle between the bottom KUDO
®
and the KBUMP.
Note:
Selecting the 5° angle sets the bottom KUDO
®
site angle parallel to the KBUMP (see also section 5.1).
Figure 23: Selecting the first enclosure angle
7.
a.
Place the KBUMP in position by aligning the stop tabs with the bottom KUDO
®
front rigging points.
The KBUMP should be installed with the serial number tag oriented
towards the rear of the array.
Support the KBUMP in order to prevent it from falling.
b.
Attach the 4 BLP in the outer storage holes so as to secure the KBUMP to the bottom KUDO
®
enclosure.
Figure 24: Placing the KBUMP onto the first KUDO
®
Inner storage hole
Outer storage hole
Stop tab
!
WARNING