KUDO
®
SYSTEME MULTI-MODE WST
®
Procédures d’Accrochage
VERSION 1.0
KUDO_RM_ML_1.0
w w w . l - a c o u s t i c s . c o m
2 fr
7.
Vérification du matériel
Tous les éléments du système doivent être inspectés avant utilisation afin de détecter d’éventuels
défauts.
Prière de se référer à la section ‘‘Entretien et maintenance’’ de ce manuel et des manuels des autres
éléments du système pour description des procédures d’inspection.
Tout élément présentant un défaut doit immédiatement être marqué et placé hors du circuit
d’utilisation pour inspection par un service de maintenance agréé.
8.
Équipements de levage complémentaires
L-ACOUSTICS
®
ne peut être tenu responsable de l’utilisation d’équipements et d’accessoires de
levage fournis par d’autres fabricants.
Il est de la responsabilité de l’utilisateur de s’assurer que la Charge Maximale d’Utilisation (CMU) de
tout équipement de levage complémentaire soit supérieure au poids total du système suspendu.
9.
Points de suspension
Il est de la responsabilité de l’utilisateur de s’assurer que la Charge Maximale d’Utilisation (CMU)
des points de suspension soit supérieure au poids total du système suspendu.
10.
Limites mécaniques du système
Lors du posage ou du levage du système il est de la responsabilité de l’utilisateur de respecter les
limites mécaniques décrites dans ce manuel.
Avant montage, vérifier la conformité mécanique de toute configuration à l’aide d’une modélisation
dans le logiciel SOUNDVISION (section ‘‘Mechanical Data’’).
11.
Règlementation locale
Certains pays imposent des Coefficients de Sécurité à la Rupture supérieurs et une règlementation
spécifique pour l’installation en hauteur. Il est de la responsabilité de l’utilisateur de s’assurer que
tout levage d’un système L-ACOUSTICS
®
soit réalisé dans le strict respect de la règlementation
locale en vigueur.
De manière générale, L-ACOUSTICS
®
recommande l’utilisation d’élingues de sécurité pour toute
installation en hauteur.
12.
Levage d’un système
S’assurer que personne ne se trouve au-dessous d’un système lors de son levage.
Au cours du levage du système vérifier que chaque élément soit bien accroché à l’élément
immédiatement supérieur.
Ne jamais relâcher la surveillance du système pendant la procédure d’installation.
13.
Posage d’un système
Ne pas poser un système sur un sol ou plateforme instable.
Si le système est posé sur une structure, plateforme, ou scène, toujours vérifier que cette dernière
puisse supporter le poids total du système.
Arrimer le système à la structure, plateforme, ou scène à l’aide de sangles à rochet ou tout autre
moyen approprié.
14.
Charge dynamique
L’influence du vent doit être prise en compte lorsqu’un système est installé en plein air. Le vent peut
engendrer des efforts dynamiques sur les éléments d’accrochage et les points de suspension. Si la
force du vent est supérieure à 6 sur l’échelle de Beaufort il est fortement recommandé de descendre
et /ou de sécuriser le système.
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING