Technical description
LA-POWER II distribution panel
LA-POWER II is a 2U / 19 inch I/O power distribution panel.
The LA-POWER II is equipped with a mains switch. The factory default settings is
EU MODE CEE FORM
400 V / 32 A
.
To use LA-POWER II in US mode, position the switch on
US MODE NEMA L21-30P 120-208 V
before
connecting to a power source.
LA-POWER II is equipped with an IN socket for US MODE, one IN and one LINK socket for EU MODE (to power a
secondary rack). Power is automatically balanced with an even number of LA12X per phase.
LA-POWER II is tted with three power cords equipped with 32 A Neutrik powerCON sockets for the LA12X amplied
controller.
Additional outlets (one NEMA, one "Schuko" and two IEC) are available to power auxiliary accessories such as Ethernet
switches and laptop. The auxiliary circuit is protected by a circuit breaker. Refer to section
(p.18) before use.
Three dual LEDs help monitor phase presence, independently from the mains switch position: their left sides indicate
phase presence at the US IN connector, and their right sides indicate phase presence at the EU IN connector. The LEDs
are for information only. Always apply the necessary safety precautions regardless of the LED status.
1
2
4
5
3
6
7
8
9
10
1
2
1
AC input connector (US mode)
8
AC output cables for LA12X
2
AC input connector (EU mode)
9
mains switch
3
AC link connector (EU mode)
10
AC auxiliary output connector (AUX L3)
4
AC presence LEDs
5
circuit breaker (AUX L3)
6
AC auxiliary output connector (US mode)
7
AC auxiliary output connector (EU mode)
LA-RAK II user manual (EN) version 2.0
12
