Installation
L-NET cabling
The integration of the Ethernet-based L-NET network, with its high speed data transfer protocol up to 1 Gb/s, allows up to
253 amplied controllers to be controlled and monitored in real-time from the LA Network Manager software.
Multiple network topologies such as daisy-chain, star and hybrid are congurable. The computer running LA Network
Manager and the amplied controllers are connected to each other using industry standard CAT5e U/FTP cables (or
higher category) tted with RJ45 connectors.
Operating instructions
Refer to the
LA Network Manager
video tutorial for detailed operating instructions.
LA-PANEL II is equipped with four RJ45 sockets and four CAT5e U/FTP cables.
Internal L-NET cabling
LA-PANEL II rear side features two etherCON sockets for internal L-NET network connection to all three LA12X.
L-NET connectors on rear panels of LA12X and LA-PANEL II
There are two potential cabling schemes:
Cabling scheme A
Connecting a rst LA12X through one of its L-NET sockets and routing the network towards another LA12X through its
other L-NET sockets, for a daisy-chain topology.
Line from AMP 3 to L-NET IN: for daisy-chaining multiple
LA-RAK II. Refer to
(p.29) and
(p.30).
27
LA-RAK II user manual (EN) version 2.0
