Loudspeaker congurations
X4r point source with low-frequency element
Deployed as a point source with SB6r or SB10r subwoofers, an X4r system operates with augmented LF resources.
For closely coupled congurations, the [X4] preset delivers a reference frequency response in short throw applications,
and the [SB6_200] and [SB10_200] presets provide SB6r and SB10r with an upper frequency limit at 200 Hz.
For coupled congurations, the [X4] preset delivers a reference frequency response in short throw applications, and the
[SB6_100] and [SB10_100] presets provide SB6r and SB10r with an upper frequency limit at 100 Hz.
For separated congurations, the [X4_60] preset provides X4r with a lower frequency limit at 60 Hz, and the [SB6_60]
and [SB10_60] presets provide SB6r and SB10r with an upper frequency limit at 60 Hz.
X4r, SB6r, and SB10r are driven by the LA2Xi / LA4X / LA7.16i / LA12X amplied controllers.
X4r point source with SB6r
Closely coupled
With SB6r and the preset [SB6_200], the bandwidth of the X4r system is extended down to 32 Hz and the system
contour is reinforced by 9 dB
at 50 Hz (peak low-end SPL).
in-ceiling/wall
reinforced contour
+ 9 dB
at 50 Hz
recommended max.
90 cm / 35 in
Enclosure
X4r
SB6r
Preset
[X4]
[SB6_200]
Ratio
1 X4r : 1 SB6r
Frequency range (-10 dB)
32 Hz - 20 kHz
Delay values
Do not forget to add the pre-alignment and geometric delays depending on the conguration.
*
Contour value takes into account the effect of the wall and oor on the contour.
X4r owner's manual (EN) version 1.0
19
Summary of Contents for X4r
Page 1: ...X4r owner s manual EN...
