Connection to LA amplied controllers
3.
Strip the wires of the cable.
A = 10 mm / 0.4 in
A A
2 × 2.5 mm² cable
Refer to the cable manufacturer documentation for the wire color code.
4.
Insert the wires into the terminals and tighten the screws on the terminals with a at screwdriver.
+
−
3 mm
−
5.
Secure the connector sealing plate to the enclosure.
Apply a torque of 0.6 N.m.
T10
0.6 N.m
X4r owner's manual (EN) version 1.0
37
Summary of Contents for X4r
Page 1: ...X4r owner s manual EN...