Mechanical safety
X8 rigging manual (EN) version 1.0
8
Mechanical safety
Maximum configurations
The X8 rigging system complies with 2006/42/EC: Machinery Directive. It has been designed following the guidelines
of BGV-CI.
2006/42/EC: Machinery Directive specifies a safety factor of 4:1 against the rupture. The limits specified in the tables
below are given with a safety factor of
—
5:1 or higher
for flown deployments,
—
1.8:1 or higher
for ground-stacked deployments.
Refer to Soundvision for the safety factor of a specific deployment.
The
safe limit
gives the maximum number of elements for which the safety factor is always compliant with the
2006/42/EC: Machinery Directive, regardless of the other deployment parameters (site angles, inter-enclosure angles,
etc.)
The
maximum limit
gives the maximum number of elements for which the safety factor can be compliant with the
2006/42/EC: Machinery Directive, when the other deployment parameters provide the best mechanical conditions.
X8
Configuration
Rigging accessory
Maximum / Safe limit
Ground-stacked
No rigging accessory
1
Flown
X-UTILT /X-UL8 /X-US8 /X-BAR
1
SB15m
Configuration
Rigging accessory
Maximum / Safe limit
Ground-stacked
No rigging accessory
4
Mechanical safety of the rigging system
Before any installation, always model the system in Soundvision and check the
Mechanical Data
section for
any stress warning or stability warning.
Summary of Contents for X8
Page 1: ...X8 rigging manual 1 0 EN...
Page 4: ...4 EMBi specifications 56...
Page 40: ...Rigging procedures X8 rigging manual EN version 1 0 40 6 Lift the assembly...
Page 57: ......
