background image

Propane Vapor

Withdrawal

 MODEL                              OUTPUT

                                 

FUEL

CR035AZPA220208

35,000 Btuh (10.25 kW)

Congratulations!

You have purchased the finest radiant construction heater available. 

Your new L.B. White heater incorporates the benefits from the most experienced

manufacturer of heating products using state-of-the-art technology.

We, at L.B. White, 

thank you

for your confidence in our products and 

welcome any suggestions or comments you may have...call us, toll-free, 

at 1-800-345-7200.

Owner's Manual and Instructions

Sun Blast

™ 

Radiant Construction Heaters

View this manual online at www.lbwhite.com

ATTENTION ALL USERS

This heater has been tested and evaluated by ETL in accordance with the

requirements of Standard ANSI Z83.7

CSA 2.14 and is listed and approved as a

direct fired construction heater for use on combustible floors.  This heater is

intended for use as a portable, temporary heater for buildings under construction,

alteration, or repair.  If you are considering using this product for any application

other than its intended use, then please contact your fuel gas supplier, or the L.B.

White Co., Inc.

SCAN THIS QR CODE

with your smartphone or 
visit http://goo.gl/nvneR
to view maintenance
videos for L.B.White heaters.*

*Requires an app like QR Droid for Android or 
QR Reader for iPhone.

150-29531

4009176

Summary of Contents for CR035









































Reviews: