Volt™ 3
Electric Fan Heater
www.lbwhite.com
Owner’s Manual • Volt™ 3
6
■ Keep heater clean. Use pressurized air to blow
fan blades clean. Note! Use moderate pressure to
avoid damage to fan blades
■ Inspect heater before and after each use
■ The fan motor is sealed and has permanently
lubricated bearings
Maintenance
WARNING
■ NEVER SERVICE THE HEATER WHILE IT IS
PLUGGED IN, RUNNING OR HOT. SEVERE
BODILY INJURY OR ELECTRIC SHOCK MAY
OCCUR.
■ ONLY QUALIFIED PERSONS ARE ALLOWED
TO OPEN HEATER FOR SERVICE.
NO USER-SERVICEABLE PARTS INSIDE.
Storage Instructions
When not in use, the heater must be disconnected
from power source, cleaned of dust and stored in a
dry place.
The power supply cord should be loosely wound
around the handle of the heater.
Wiring Diagram
M Fan Motor
R
Heating Element
S2 Ambient Thermostat
S3 Overheat Limits Switch
X1 Terminal Block
X2 Grounding Lug
X3 Power Cord & Plug
