19
(3) Press
code
in text editing mode to change text case. (If this entry can accept number
only, pressing
code
will have no effects.) Indicators on the screen show the current
setting:
123
= Number only
abc
= No capital letters
ABC
= All capital letters
CODE
= Internal code for the selected language, such as Chinese, Japanese, etc.
(4) Press a number key (
1-9, 0)
repeatedly until the character you want appears. (
1
for 1 or
space,
2
for 2, a/A, b/B, or c/C, the others as shown on the keypad) If internal
CODE
is
selected, a
CODE
box
will be shown (after the first code is entered) for each new code to
be entered. Please check the internal code table for the selected language. For 2-byte
code, e.g. Chinese or Japanese, the code accepted is from 0000 - FFFF.
(5) Press
mark
to bring up a list of punctuation marks and special characters. The
highlighted character in the list shows the selected one. Press
▲
▼◄►
to change the
selection.
(6) If you make a mistake, press
BS
to remove the character to the left of the cursor, or press
DEL
to delete the character at the current cursor position.
(7) In text editing mode, internal code box, and mark list, press
ENTER
to exit and save
changes, press
ESC
to exit without making changes.
4.2 Login And Logout
There are three password levels in the system, including
Administrator
(highest),
Supervisor
, and
Operator
(lowest). If the user does not login the system, he/she will be
treated as “Guest” and can only view live video display.
The system allows up to 18 user accounts. The administrator can set up the login name and
password for each user. (Please refer to
Section 6.7
for Password Setup.)
The Operator can operate live video display, the Supervisor live video display, image
playback and archive, and the Administrator everything.
To login/logout the system, press
MENU
in
split-window display to call up Menu display, and
then press
ENTER
when the highlighted option is
Login/Logout
to enter Login/Logout display as
shown.
In Login/Logout display, follow the Text Input
method described in
Section 4.1
to enter the
Login name
and
Password
, press
▲
▼
to
highlight and select
Login
option, and then press
ENTER
to login the system. If the user
wants to logout the system, just press
▲
▼
to highlight and select
Logout
option, and then
press
ENTER
. Press
ESC
to exit without making changes.
