34-60
Figure 2.4
Figure 2.5
Windows should then display a message indicating that the installation was successful
(Figure 2.6). Click "Finish" to complete the installation for the first port of the device.
If the device is based on the FT2232, the Found New Hardware Wizard will continue by
installing the USB Serial Converter driver for the second port of the FT2232 device. The
procedure for installing the second port is identical to that for installing the first port from
the first screen of the Found New Hardware Wizard. This is done automatically if the
driver is Microsoft WHQL certified. If the device is not based on the FT2232, the COM
port emulation driver is loaded as indicated in the following steps.
The Found New Hardware Wizard will launch automatically to install the COM port
emulation drivers. As above, select "No, not this time" From the options and click "Next"
to proceed with the installation (Figure 2.7).
