10
SERVICE
Lubrication
The axle bearings and the side rod bearings should be lubricated occasionally with a
small amount of Märklin-Oil (7149).
Replacing the traction tire (E126 174)
• Loosen the screw on the side rod and remove the side rod from the wheel pivot.
• Remove the old traction tire by using a small flat-blade screwdriver: Pry the old
traction tire out of the groove on the driving wheel.
• Carefully push the new traction tire over the wheel and insert it into the groove on
the wheel.
• Check to make sure that the traction tire is properly seated.
• Reassemble the model.
Controllable Functions
Lighting
1
LV + LR
Sound effect: Long whistle blast
1
Sound 1
Sound effect: Squealing brakes off
2
BS
Sound effect: Bell
3
Sound 3
Sound effect: Announcement
4
Sound 4
Sound effect: Coal being shoveled
5
Sound 9
Sound effect: Operating sounds
1, 2
6
FS
Smoke generator
7
AUX 5 &
SUSI F7
Sound on/off
8
ABV, off
9
Engineer‘s cab lighting
10
AUX 3
Sound effect: Departure whistle
11
Sound 5
Double A switching light
12
LV + LR
Sound effect: Conductor whistle
13
Sound 13
Sound effect: Short whistle blast
14
Sound 2
Sound effect: Blowing off steam
15
Sound 14
Sound effect: Injector
16
Sound 12
Sound effect: Sanding
17
Sound 15
Sound effect: Blowing off steam
18
Sound 21
Sound effect: Coupling together (buffer to buffer)
19
Sound 20
Sound effect: Doors being closed
20
Sound 16
Sound effect: Conductor whistle
21
Sound 17
Sound effect: Filling coal
22
Sound 18
Sound effect: Filling water
23
Sound 19
1
active in analog operation
2
with random sounds
