•
Press the “IR” button again to switch off the IR LED light. “IR0” will be shown at the lower center of the display.
、
Switching off the IR LED when ambient light levels are adequate for viewing without it (full moon, near streetlights,
etc.) will extend battery life and running time. Press the “IR” button once again to switch to DAY Mode-no IR value
will be indicated.
IMAGE BRIGHTNESS BUTTON (E)
The Image Brightness (Sun Icon) button can be used to change the digital imaging frame rate, producing
a brighter image for viewing or recording.
•
Pressing the Brightness (Sun icon) button repeatedly will cycle through the available frame rates, beginning with
the default frame rate (fastest), until the last (slowest, brightest) frame rate is reached. After that, the next press
of the button returns back to the original fastest rate. The default, fastest frame rate in Night Mode is 25fps.Pressing
the Brightness button cycles through the other frame rate settings, with the third press returning to the default
again: 25fps>15fps>8fps>25fps>etc.
•
In Day Mode, the default frame rate is 30fps. The frame rate cannot be changed in Day Mode, therefore the
Brightness button will have no effect. The display is a color LCD, and images will appear in color in daytime use, or
in strong artificial lighting conditions.
NOTE: selecting frame rates lower than the default 25fps in Night Mode will provide a brighter
image, however the decreased frame rate may cause moving subjects to appear less smooth or
stable when viewed.
