REV5
For any questions please contact us at toll free (877) 482-2040 Mon-Fri 8 a.m. to 4:30 p.m. 3
135lb Stainless Steel Spreader Installation
2.0
IMPORTANT
INFORMATION
2.1
ABOUT THIS MANUAL
The purpose of this manual is to assist you in properly and safely operating and maintaining the
135lb Stainless Steel Spreader. Read and understand this entire manual before attempting to set-
up, operate, adjust, perform maintenance on, or store this attachment. This manual provides
essential information and instructions, which will help you enjoy years of dependable
performance.
The designed and tested safety of the 135lb Stainless Steel Spreader is dependent upon its
operations within the parameters and limitations explained in this manual. Be familiar with and
follow all safety rules in this manual as well all safety rules for any related equipment, including
the Snowrator.
Although these instructions have been complied through extensive field experience and
engineering data, some information presented herein may be generated in the nature due to
unknown and/or varying operating conditions. However, these instructions, combined with your
increased experience with the Snowrator, will enable you to develop procedures suitable to your
particular application.
The illustrations and data used in the manual were current at the time of printing, but the
Snowrator and 135lb Stainless Steel Spreader may vary slightly due to ongoing engineering
changes. L. T. Rich Products, Inc reserves the right to implement engineering and design
changes to the Snowrator as may be necessary without prior notification.
2.2
OVERVIEW
The 135lb Stainless Steel Spreader is an optional attachment that can be mounted to the
Snowrator and used to spread salt/granular product. It has a variable speed electric motor which
allows variable spread distances from 6 to 25 feet. This depends on volume/density, particle size
and rate of travel, and weather conditions. The pattern can be increased or decreased while
spreading depending on needs. Travel at a constant speed for consistent results.
The 135lb Stainless Steel Spreader Attachment features stainless steel construction, electronic
speed control, vibrator, rate control and directional control.
2.3
SAFETY
Safety is a primary concern in the design and manufacturing of all L. T. Rich Products.
Unfortunately, our extensive efforts to provide safe equipment can be negated by a single
careless act of an operator. In addition to the design and configuration of the 135lb Stainless
Steel Spreader, hazard control and accident prevention are also dependent upon the awareness,
condition, maintenance, and storage of the Snowrator and all optional attachments. This section
is only for the 135lb. Stainless Steel Spreader. Please refer to the Owner's Manual for applicable
safety information for the Snowrator. Additional safety tips are provided throughout this
document.