3
WARNING
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE
PRECAUTIONS WHEN WELDING. ASK FOR YOUR EMPLOYER‘S SAFETY PRACTICES WHICH
SHOULD BE BASED ON MANUFACTURER‘S HAZARD DATA .
ELECTRIC SHOCK ... CAN KILL!
Install and earth the welding or cutting equipment in accordance with applicable standards.
Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
Insulate yourself from earth and workpiece.
Ensure that your working place is safe.
FUMES AND GASES ... CAN BE DANGEROUS TO HEALTH!
Keep your head out of the fumes.
Use ventilation, extraction of fumes at the arc or both to keep fumes and gases out of your breathing
zone and the general area.
ARC RAYS ... CAN INJURE EYES AND BURN SKIN!
Protect your eyes and body. Use the correct welding screen and filter lens and wear protective,
insulating and non-flammable clothing.
Protect bystanders with suitable screens or curtains.
FIRE HAZARD!
Sparks and spatters can cause fire. Make sure, that there is no inflammable material
in the surrounding of welding and cutting works.
MALFUNCTION!
Call for expert assistance in the event of malfunction.
Read and understand the instruction manual before installation and operation
Protect yourself and others!
Safety advice
Summary of Contents for PLASMAWELD 202
Page 24: ...24 Wiring diagram...
