BPA10T30W100
Broadband System User Manual
E-Mail: sales@l2microwave.com
www.l2microwave.com
- 5 -
•
RF amplifiers that produce high field strength through radiation antennas for EMC measurements, materials,
and device testing in fully shielded chambers.
•
RF amplifier for energy generation for particle acceleration.
•
RF amplifiers for feeding magnetic field coils.
1.3.
Responsibility of the Operator
Operator
The operator is the company/institution that operates the instrument for its own commercial or scientific
purposes or makes it available for use/usage to third parties and holds the legal product liability for protecting
the user, personnel or third party during operation
.
Obligations of the operator
The broadband amplifier is used in commercial applications, and operators of the broadband amplifier are
subject to legal obligations for industrial safety. In addition to the safety instruction in this manual, the
regulations for safety, accident prevention, hygiene and environmental protection must be observed. In
particular, the following applies.
•
The operator shall be familiar with their workplace safety regulations and risk assessment to identify the risks
that may arise from the specific operating conditions of the site where the broadband amplifier is used.
Appropriate operating instruction for operating the broadband amplifier should also be prepared to prevent
hazards.
•
The operator shall periodically check that operational instructions created in accordance with the rules
during the entire operating time of the broadband amplifier meet current regulatory requirements. The
operator shall modify the operating instructions when any changes are made.
The operator shall also be responsible for ensuring that the broadband amplifier and all systems connected
to the instrument are always in perfect working order. Therefore, the following applies.
•
The operator shall be obligated to have all safety devices that are connected to the system checked regularly
for proper function and completeness.
•
The operator of broadband amplifier system is responsible for ensuring the safe working conditions of the
personnel.
•
The operator must comply with the maintenance period described in this manual.
When an operator enters or exits a room where high field strengths occur, the RF interlock system and
personal RF warning devices must be used to protect against the risk of radiated RF power.
