BPA10T30W100
Broadband System User Manual
E-Mail: sales@l2microwave.com
www.l2microwave.com
- 8 -
2.
Safety
2.1.
Basic Safety Instructions
Chapter 1 "General" of this manual contains "Basic Safety Instructions" that apply to all products produced
and supplied by L2 Microwave. The BPA10T30W100 broadband amplifier system and its ancillary equipment
must only be operated by qualified technicians.
Compliance with all legal provisions is a prerequisite for operating the broadband amplifier. The operator or
agent authorized by the operator is responsible for complying with these instructions. And training for
authorized representatives must meet local requirements
.
2.2.
Product-specific Safety Instructions
2.2.1.
Safety Instruction for Amplifier System and Equipment
•
Only trained personnel can perform electrical installation and connection tasks.
•
When installing an operating area and installing or operating electrical equipment, always comply with the
relevant national and international safety rules and regulations.
•
When installing an amplifier rack, it is important to comply with national special accident prevention.
2.2.2.
Hazards from Supply Voltage
Risk of fatal injury from electrical voltage
•
When working with voltages that constitute a shock hazard, appropriate measures must be taken to prevent
exposure to danger.
2.2.3.
Power Supply
Risk of property damage
Operation without protection against overloads and short circuits can lead to damage to the instrument, fire,
or arcing
.
•
Before connecting the power supply, it is important to ensure that the system or the power supply
specifications applied to the equipment comply with the general specifications of the local power supply
network
.
•
The power supply device must be protected at all times through a fuse or an earth leakage power breaker to
prevent overload and short circuit
.
•
If the equipment is permanently connected to the power supply without a power plug, install a device that
will power off the power supply circuit at all poles
.
