p. 60
Enter Ident
Displays the alphanumeric keypad to allow a facility to be
selected by its ident. When a facility has been successfully
selected, the Select Station menu is displayed to allow you to:
Display station information
Fail/restore the facility
Display range/bearing information
Set the facility as the map centre
Selecting range/bearing displays the ident, bearing and range of
the facility in the map display title bar.
Close
Removes keypad from display.
5.3.8
Select Entity On Map
APT
RWY
ILS
MKR
VHF lo pwr
VHF hi pwr
NDB
AWY MKR
Allow the associated facilities to be displayed / hidden during
station selection. Refer to Declutter for a description of each
station type.
Zoom In
Steps down through the map ranges with each selection.
Zoom Out
Steps up through the map ranges with each selection.
OK
Displays the Select Station menu of details for those stations
within the area of interest defined by the white circle. The menu
displays “Nothing Found” if there are no stations within the area
of interest.
Enter Ident
Displays the alphanumeric keypad to allow a facility to be
selected by its ident.
Cancel
Removes the keypad from the display.
5.3.9
Storm Control
This toolbar is selectable from the Map Toolbar and allows you to control and modify the
storm models.
SELECT
Displays the Storm Select keypad which shows the available storm
models pictorially and dimensionally. When a storm is first selected, it is
inactive and is displayed in outline form in its default position on the Map
display, but it will not be shown on the weather radar display.
