MPM-1000A Operator Manual
1000-7075 Rev E
5-7
Table 5-1 File Configuration
Item
Functions
Save Config
Saves the active configuration using the same configuration description and
file name.
Save Config As
Saves the active configuration using a new configuration description and file
name. The Save Configuration dialog will be displayed to allow you to enter a
new description and options.
Restore Config
Restores the Modem to a previous configuration. You select a saved
configuration file (*.xml file). A Restore Configuration dialog will be displayed to
allow you to select specific options and Modem mode after restoring the
configuration.
Exit
Exits the HCI application. Note: Exit stops the HCI application only, the MPM-
1000 Modem will continue to run.
5.7 Save/Save As Configuration
The
Save Configuration
dialog appears when you request to save a configuration file for
the Modem.
Refer to Table 5-2 Save Configuration
for data descriptions for this window.
Figure 5-12 Save Configuration
a. Type in a description in the
Description Field
.
b. Select the items that you wish to save in this configuration in the
Save Options
field.
c. Select
Save
. Once Save has been selected a
Save As
(See Figure 5-13) screen
will appear.
d. Name the configuration file and select
Save
.
Table 5-2 Save Configuration
Control/Indicator/Function
Description
Description
Accepts up to 255 characters for description of the Modem configuration.
Save Options
Node Name
Current NCW name (Node Name) for the Terminal that will be saved if
selected.
Terminal Location
Current Latitude/Longitude of the Terminal will be saved if selected.
