MPM-1000A Operator Manual
1000-7075 Rev D
6-5
Figure 6-4 Satellite List Screen
Table 6-3 Satellite Database
Control/Indicator/Function
2
Description
Satellite Entry/Update
** Name
Satellite Name, ex
– AMC-9 (ZeroTest is a keyword recognized by the
software indicating that there is no satellite. Causes the software to set
the round trip delay to 0 for testing).
** Location
Satellite Longitude
– (e.g. 83W).
SVOW Frequency Offset
(kHz)
(kHz)
Voice Orderwire offset from the selected center frequency.
PN Select
Pseudo-random number identifier for spread-spectrum operation.
Beam
Selecting
Beam
will open a dialog box to edit, add or delete a selected
beam.
B/W Segments
Selection
B/W Segments
will open a dialog box to edit, add or delete a
selected B/W Segment.
6.3.2 Beams List
You use this dialog to select a beam to edit, or to add a beam to this Satellite. Click on
the Beam button on the Satellites screen to get to this dialog. (See Figure 6-5) To edit a
Beam, you must highlight the desired beam to edit and then click on
Edit
.
Refer to Table 6-4 Beams List for data descriptions for this window.
2
Items with asterisks are Required Fields.
