18
Advice On The Safety Of Children
During the stove functioning, the ceramic coating heats up progressively (until 40/50°C)
to lose heat to the environment. It is very important to keep the children away from the
stove in order to avoid touching the ceramic coating, with the risk of burns.
In addition, the ceramic glass and the metal door of the fireplace can get red hot; it is
therefore essential to avoid touching these parts or leaving the stove lighted in the pre-
sence of unattended children.
As a general rule, it is essential to closely monitor children who are close to the lighted
stove and to prevent the touching of it or attempting to open the fireplace door.
In relation to the instructions above, it remains at the Customer discretion the decision
to install a protective shield around the stove or in front of the fireplace door.
ASSEMBLY SCHEMES
Round Stack - WOOD Base
Flue pipe hole
1. Position the fireplace in axis
with the flue pipe hole.
2. Unscrew and remove
exchanger.
Put the 1st ceramic ring
on the wood base.
3. Door flange assembly with
screws M6. To screw the flange,
slightly move the 2 lateral
refractory bricks. Start screwing
n¡1 and n¡2.
When finished (all screws)
stack the exchanger and screw it.
1= First fireplace ceramic ring
2= Second fireplace ceramic ring
3= Third ceramic ring
4= Top cover
5= Ceramic column
6= Ceramic Cube
6. Flue pipe connection
4. Stack fom above
the second fireplace ceramic ring.
Tuck the door into its hinges.
5. Stack the third ceramic pierced
body element and the top cover.
°
°
