ASSEMBLY SCHEMES
ASSEMBLY SCHEMES
Round Stack - SLIM, RIM,
LONG and SIDE base
Rondò
Chimney flue hole
1. Position the fireplace
in axis with the flue pipe
hole.
4. Insert ceramic fireplace
from above. Put it near the
door.
6. Stack ceramic top cover.
Connect to the chiminey
flue.
5. Insert the following cera-
mic rings from above.
Ashes cleaning from the
door with a proper shovel.
3. Brass door assembly
with 4 M6 screws in the four
corners under the gasket.
Put 2 M4 screws in the
middle of the door.
2. Insert ceramic base
from above.
Insert primary air dipstick
in its hole and screw it.
Chimley flue hole
1. Position the fireplace in axis
with the flue pipe hole.
2. Unscrew and remove
exchanger.
Put the 1st ceramic ring
on the wood base.
3. Door flange assembly with
screws M6. To screw the flange,
slightly move the 2 lateral
refractory bricks. Start screwing
n¡1 and n¡2.
When finished (all screws)
stack the exchanger and screw it.
4. Stack fom above
the second fireplace ceramic ring.
Tuck the door into its hinges.
5. Stack the third ceramic pierced
body element and the top cover.
6. Flue pipe connection
1= First fireplace ceramic ring
2= Second fireplace ceramic ring
3= Third ceramic ring
4= Top cover
5= Ceramic column
6= Ceramic Cube
°
°
