10
1
2
3
Accessories
Please refer to
Oven racks
The oven racks are retained when pulled forward but can be
easily removed and refitted.
To fit the telescopic shelf runners
1.
With the runner arm in the closed position locate the
opening of the upper rear slot onto the side support
.
DO NOT
locate any further than the
opening at this point.
2.
Lift the front of the runner arm to locate the front slot
against the side support (
3.
Push the runner arm towards the rear of the oven. The
catch at the front will lift and drop to secure the runner
arm in place (
To fit a shelf to the telescopic shelf runners
Slide the telescopic runners forward until they stop. Holding
the shelf above the runners, tilt the front downward and
locate into the front of the runners. Lay the shelf flat. Press on
the rear of the shelf to secure in place.
To remove and refit the telescopic rack and runners
Slide the rack out on the runners. While holding one of the
runners securely, carefully lift the rear of the rack upwards:
the rack will spring clear of the central restraining tab. Repeat
for the opposite side of the rack.
Note:
To aid the removal of the shelf you can insert a suitable
flat tool through the opening in the side of the runners and
lever the rack clear (
).
Tilt the front of the rack downwards and then lift clear of the
runners (
Refit in the reverse order, making sure to push the rack down
onto the runner arms.
Fig. 2.15
Fig. 2.16
Fig. 2.17
