INSTALLATION
Check the appliance is electrically safe when you have finished.
22
Converting to propane gas
This appliance is supplied set for natural gas.
A conversion kit for Propane gas is supplied with the range
(A060048)
.
The conversion must be performed by a qualified LP gas
installer.
For installation 5000 ft above sea level, the
appliance must be converted using high altitude kit
A065744. Contact your distributor.
Location of the range
The range may be installed in a kitchen/kitchen dining area
but
NOT
in a room containing a bath or shower.
The range is freestanding and should not be placed on a
separate base.
DO NOT
locate the range where it may be subject to strong
drafts. Any openings beneath the range or behind the range
should be sealed.
The range should be positioned on a solid substrate.
Your range is heavy DO NOT place on soft floor
coverings, such as cushioned vinyl or carpeting.
Use care when moving the range on cushioned vinyl or
carpeted flooring.
When the floor covering ends at the front of the range, the
area that the range will rest on should be built up to the same
level or higher than the floor covering.
Also, make sure your floor covering will withstand
180°F. (See the Installation Safety Instructions
section).
(See the Installation Safety Instructions section).
