U
S
A
&
C
ANADA
Electrical connection
I
NSTALLATION
-
mobile homes,
-
recreational vehicles or
-
in an area where local codes prohibit grounding through the neutral.
The power of the electric elements for each appliance see page 11 and pages 14 - 40.
The overall wattage of your appliance is also indicated on the nameplate label and on the warranty
certificate (See item 1 page 49 for the location of the nameplate label).
Wiring must conform to National Electric Codes.
If the electric service provided does not meet the above specifications, have a licensed electrician install an
approved outlet.
Because range terminals are not accessible after range is in position, flexible service conduit or cord must be
used at least 4 ft (1.2 m) length. The range can then be easily disconnected for servicing.
The ”La Cornue” appliance is supplied with a connection terminal block accessible by unscrewing the
stainless steel protection plate on the backside.
Terminal block: ranges with two ovens
Terminal block: ranges with one oven or one owen and
warming drawers
1.
Remove the screws and the protection plate on
the backside of the ranges.
For the cooktops remove the cover of the main
terminal box.
2.
Now the terminal block is accessible:
-
GND - Ground
-
N - Neutral
-
L1 - Line 1
-
L2 - Line 2
Axcess plate
Terminal block
Page
50
Installation Guide Château G4 - USA Canada
LA CORNUE
08NOTINSG4/ULC-1
Summary of Contents for Chateau 120
Page 73: ......
