M
AINTENANCE
Adjustments
2. F
UEL CONVERSION
Caution: Before proceeding with the conversion, shut off the gas supply to the appliance prior to
disconnecting the electrical power.
The orifices size depends on the type of gas. The table below is provided for you to determine which orifice
should be used if the type of gas is changed.
The location of the orifices for the various gas burners differ (see photographs below).
cap of the burner
orifice
gas burner
Note: Gas pressure regulator setting must also be adjusted when changing fuel type.
Orifices of gas burner and hotplate are replaced by means of this sequence:
1.
Remove the brisk heat grill, then the pan.
2.
Remove the cap of the burner.
3.
Unscrew the orifice from the top using a standard 7 mm box spanner. Install the new orifice and
screw it down completely.
4.
Place the cap of the burner taking care to place it correctly on the body of the burner.
5.
Place the pan, then the grill or the fire plate.
LA CORNUE
Installation Guide Château G4 - USA Canada
Page
63
U
S
A
&
C
ANADA
08NOTINSG4/ULC-1
Summary of Contents for Chateau 120
Page 73: ......