INSTALLATION GUIDE FOR
“C
HÂTEAU
” RANGE
- G4
08NOTINSTALG4/EN - 3
63
See the drawings on the specific presentation pages for each model for details about the
connections.
The gas inlet must provide the flow rate and pressure required for the appliance to run
smoothly.
The gas fitter is responsible for designing the pipes, reducing valves and safety components.
An incorrect gas installation does not engage the manufacturer’s liability or warranty.
When your cooker or your hob is built-in between two kitchen units, the shut-off valve
must be accessible through an appropriate cut-out in the back of the kitchen unit.
It is forbidden to use flexible rubber hoses with a collar fastening to supply gas to gas
appliances. Only approved flexible hoses with unlimited service life can be used.
When all of the work has been carried out on your gas supply network, perform a
functional test before connecting the appliance; this will ensure that no metallic burrs can
enter the appliance’s gas supply pipe and thus obstruct the burners or the gas taps.
Also, perform mechanical resistance and sealing tests in accordance with the applicable
standards.
