INSTALLATION GUIDE FOR
“C
HÂTEAU
” RANGE
- G4
08NOTINSTALG4/EN - 3
67
3.
RISER / BACKSPLASH INSTALLATION
4.
HEIGHT ADJUSTMENT
In order to ensure that the cooktop is perfectly horizontal, especially on old flooring, we advise you to
install your cooker on a wooden or cement base and your hob on a perfectly horizontal kitchen unit, the
height of which will allow you to bring the hob to a level in accordance with its environment or your own
requirements.
Each cooker is equipped with adjustable feet that allow you to compensate for differences in the floor
level.
Remove the drawers and plinths/toe-kicks, set the cooker in place, screw up the central legs so the cooker
rests on the outside legs and adjust the height. Once the cooker is resting at the right height and is level,
screw down the central legs to balance the weight.
If the appliance is on a basement, all necessary action shall be taken for the appliance not to fall.
REMINDER: Flame retardant insulation must be planned for hobs to insulate the units
underneath it.
