35
Read all instructions before installing or using this appliance.
Installation Instructions
Save these instructions for future reference.
The cooktop surround should be level with, or above, any adjacent work surface.
Above cooktop level a gap of at least 3” (7.5cm)
should be left between each side of the range and
any adjacent vertical surface. For non-combustible
surfaces (such as unpainted metal or ceramic tiles)
the gap each side can be reduced from 3” to 1”
(2.5cm).
In front of the range however the spacing at the
side must be at least 8” (20cm) to allow for the
opening of the side hinged oven doors
Plan view
A minimum space of 31½” (80cm) is required
between the top of the cooktop and a horizontal
combustible surface. The maximum depth for
cabinets installed above cooktops is 13’’ (33cm).
The depth of the range is 28/’’ (72cm) overall.
Side view
Any range hood should be installed in accordance
with the hood manufacturer’s instructions.
For safety reasons curtains must not be sited
immediately behind the range.
We recommend a gap of 43/” (111cm) (for
Canada 44/” (112.5cm)) between units to allow
for moving the range.
If a fl ush fi t is required (USA only), install the range
up to the unit at one side then install the unit the
other side.
