27
MAINTENANCE
An accurate maintenance guarantees good functioning and long-lasting perfor-
mance.
Particular care is due to the grease filter panel.
It can be removed by pushing its special handle toward the back-side of the cooker
hood and turning the filter downwards so to unfasten it from its slot (Fig.3).
To insert the filter just perform the opposite operation.
After 30 hours working, the push button control panel will signal the saturation of
the grease filter by lighting all the buttons.
Press the timer button to reset.
The grease filter needs cleaning by regular hand-washing or in dishwashers every
two months at least or depending on its use.
To clean the appliance itself tepid water and neutral detergent are recommended,
while abrasive products should be avoided. For steel appliances specialized deter-
gents are recommended.
To replace the dichroic lamp, remove the lamp by inserting a screwdriver or another
sharp tool between the lamp and its chrome support and replace it with a lamp of
the same kind 20W 12V
If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.