12
Forestière
Assembly and disassembly
SECTION FOR INSTALLERS
DISASSEMBLING THE CONTROL PANEL
Disassemble the air control adjustment lever by unscrewing the holding screw behind the
flange.
Wrap the screwdriver blade in a cloth (so as not to scratch the flanges and the facade) and
slide it between the flange and the facade.
Lift at all four corners to detach the control panel held on by springs.
To reassemble, position the springs in line with the front pins and engage the control panel
at all four corners. Replace the adjustment lever.
REPLACEMENT OF LEFT-HAND BRICK OF THE FIREBOX
It is not necessary to remove the top to replace the firebrick. Simply carry out the follo-
wing:
- Remove the hotplate hatches.
- Remove the padding plates A by removing the two fixing screws located on the top of
the oven, taking care to remove the nuts inside the oven.
- Open the inner firebox door and remove the front firebox plate.
- Unscrew the upper left-hand screw of the top to free front plate B.
- Remove left-hand plate C.
- Release firebrick D.
To reassemble, follow the same procedure in reverse.
Loading door
Top of the appliance
