6
Forestière
Operational features
SPECIFICATIONS
For a chimney draught between 0.8 and 1.2 mbar inclusive
FUEL
1. Wood:
Use 50 cm logs, preferably hard and well-dried wood (oak, hornbeam etc.).
2. Coal:
Recommended fuels:
Preferably use 20 x 30 dry-burning.
Useable fuels:
You can use 20 x 30 thin anthracite or smokeless solid fuel.
In this case the heat values and operating times will be different to those specified in the
table above.
THE FIRE BOX
WOOD
The stove can be run on
wood
once the rear fire-
box plates have been removed and the front wood
plate inserted.
COAL
The stove can be run on
coal
after inserting the
front and rear firebox plates.
Approx.
corresponding
Operating Operating
Heat
Adjusted hourly consumption time in
time in
Type of
heated
fuel
value
volume
Heating
Cooking
stand-by
normal
(kW)
(m3)
mode
mode
mode
mode
(in kg/h) (in kg/h) (in hours) (in hours)
Dry flammable
12.15
475
1.670
2.140
16 hrs
5 hrs
20x30
3. O
PERATIONAL FEATURES
Front wood
plate
“BOIS”
Front coal
plate
“CHARBON”
Rear coal
plate
