background image

 

La Crosse Technology, Ltd. 

Page 10 

 

Temperature Alerts ON/OFF 
 
Temperature alerts will indicate ON with a bell icon 

 next to each individual Hi and Lo alarm in the 

window 

TEMP. ALERT

.  Individual temperature alerts are OFF when the bell icon is not present next to 

the alert.  
 

Note:

 When no temperature alerts are set, the Temperature Alert area will show ALERTS 

OFF. 
1.  In normal time mode, hold then release the TEMP ALERT button to toggle between: 

o

 

Outdoor HI 

o

 

Outdoor LO 

 

o

 

Indoor HI 

o

 

Indoor LO 

2.  Press the MAX TEMP button to turn the selected alert ON.  
3.  The alert icon 

 appears when alarm is activated. 

4.  Press the MIN TEMP button to turn the selected alert OFF. 
 
 
Temperature Alert Sounds 

 

 

When temperature alert sounds, the corresponding alert icon   will flash. 

 

The alert beeps once every minute, until the temperature is out of alert range. 

 

Press any button to stop alert.  

 

The alert symbol    will still show. 

Turn alert OFF:   

1.  In normal mode, hold and release the TEMP ALERT button to select the alert to turn off.  
2.  Select the HI or LO alert in the window 

TEMP. ALERT

3.  Press the MIN TEMP button to turn that alert OFF. 

 
 

Heat Index and Dew Point Temperature 

 

Heat Index 
 
Heat Index combines the effects of heat and humidity. It is the apparent temperature of how hot it feels to 
a human being. As humidity increases, the body is unable to cool effectively; therefore, the temperature 
will feel warmer. 
 

View Heat Index:

 From a normal display, press the HEAT/DEW button once and Heat 

Index will show instead of the outdoor ambient temperature. 
 

Note:

 Heat index will be the same number as the temperature until the outdoor 

temperature is above 80 °F (26.7°C).  

 

Dew Point Temperature   
 
Dew Point Temperature is the saturation point of the air, or the temperature to which the air has to cool in 
order to create condensation. The higher the dew points, the higher the moisture content of the air at a 
given temperature. 

 
View Dew Point Temperature:

 From a normal display, press the HEAT/DEW button 

twice and Dew Point will show instead of the outdoor ambient temperature. The words 
Dew Point will show near outdoor temperatures.  
 

Note:

 Dew Point is lower than the actual temperature. 

 
 
 
 

Summary of Contents for 308-1412














Reviews: