WIRELESS TEMPERATURE STATION
8 | PAGE
Factory Restart:
1. Bring sensor within 5 feet of your station. Remove batteries from station and sensor for 15 minutes.
2. With batteries out, press any button on the station 20 times.
3. After 15 minutes insert fresh batteries into your sensor and into your station.
SENSOR SEARCH
• If you are seeing dashes in place of outdoor temperature, first check your sensor batteries.
• Hold the PLUS (+) button for 3 seconds to search for the sensor. Sensor Reception icon will flash while
searching and be solid when sensor signal is received.
• If you regain connection while the sensor is mounted, great. If you do not regain connection, bring the
sensor within 10 feet of the station and search again.
Note:
• If the signal is lost, the station will display the last data recorded from sensor for 10 minutes.
• After that 10 minutes if the signal does not come back then you will see dashes “--”.
• After 30 minutes, start looking for the sensor signal automatically.
FACTORY RESTART
SENSOR WEATHER SHIELD-NOT INCLUDED
•The Sensor Weather Shield is designed to protect your outdoor sensor from rain
and snow.
•This shield will offer limited protection from the sun’s heat.
If you require additional support, call or customer support team based out of La Crosse, Wisconsin.
Phone:
1.608-782-1610
Or fill out our online support request form here:
Our knowledgeable support team is available: Monday-Friday, 8am-6pm CST
Ask questions, watch detailed setup videos, and provide feedback on our social media outlets!
WE’RE HERE TO HELP!
JOIN THE CONVERSATION
