• The alert icon will only show when the alert is active, and
will indicate HI or LO alert.
• When armed alert value is reached, station will beep 5 times,
once each minute, until out of alert range.
• The flashing alert icon will indicate whether it is a LO or HI
alert that is sounding.
• Press any button to stop the alert from sounding.
• The alert icon will still flash while value is in alert range.
Disarm Alert:
1. Hold the ALERTS button to enter alert setting menu.
2. Press the ALERTS button until you see the alert you wish to
disarm.
3. Press the + or - button to disarm the alert. The alert will not
sound and the alert icon will not show.
4. Press the LIGHT button to exit.
Active Alert
Backlight (3 intensity levels)
• When operating with the AC adapter, press and release the
LIGHT button to adjust the backlight.
• Intensity Levels: 0% | 20% | 100%
• When operating on battery power only, press the LIGHT
button to activate the backlight for 10 seconds at 100%.
Low Battery Icon
• By indoor temperature; replace batteries in station.
• By outdoor temperature; replace batteries in the sensor.
• If your signal is lost, your station will display its LAST DATA
recorded from your sensor for 10 minutes.
• After that 10 minutes if the signal does not come back,
dashes will show.
• From the main screen hold the SEARCH button to search for
your outdoor sensor.
• The sensor reception icon will animate while searching for
your sensor.
• The icon will be solid when the sensor is connected.
• Your station will search for your missing sensor for 3 minutes
every hour until signal is found.
Sensor Search
Page | 13
Page | 14
