background image

The moon phase is based on the Lunar Calendar and updates 

when the year, month and date set (manually or by the WWVB 

atomic time signal).

Moon Phases

Pressure Readings

History Graph:

• Read from left to right, your Pressure History Graph indicates 

   the rise and fall in air pressure over the past 24 hours.

• The numbers below represent the hour in which the 

   reading was taken. The “0h” is the current pressure level. 

   “-3h” was the reading taken three hours ago, compared to 

   current pressure.

•The graph will scroll continually. This cannot be turned off.

Your station provides Relative Barometric Pressure in:

• 

Numbers

-programmable in the settings menu

• 

History Graph

- provides pressure trend for the past 24 hours

Pressure number: 

 

• Your station will acclimate to the correct pressure without 

   setting it yourself.  

• You also have the option of setting the pressure number to  

   match your local reporting station by using the settings 

   menu.

• In the settings menu you can also select the pressure unit of 

   Inches of Mercury (inHg default) or Hecto Pascal (hPa).

•Your weather station will change to reflect the seasons.

• The trees and foliage will change to give you a fresh look.

• The dates are programmed into your weather station for an 

   automatic foliage 

change.

Seasonal Changes in Foliage

March 20th – June 20th

Spring

Autumn

Summer

Winter

June 21st – Sept. 20th

Sept. 21st – Dec 20th

Dec 21st – Mar 19th

Page | 7           

 

 

 

 

 

 

        Page | 8

New

 Moon

 Waxing 

Crescent

First 

Quarter

 Waxing 

Gibbous

Waning 

Crescent

Last

 Quarter

Waning 

Gibbous

Full 

Moon

Summary of Contents for 308-1416v2












Reviews: