La Crosse Technology, Ltd.
Page 7
•
Stucco held to the wall by a metal mesh will cause interference.
•
Transmitting antennas from: ham radios, emergency dispatch centers, airports, military
bases, etc. may cause interference.
•
Electrical wires, utilities, cables, etc. may create interference if too close.
•
Vegetation is full of moisture and reduces signal.
•
Dirt: Receiving a signal through a hill is difficult.
WEATHER STATION
12-HOUR TIME FORMAT
•
Time display: 12-hour or 24-hour format.
•
Default is 12-hour time.
•
Use the Program Menu to switch time formats.
POWER REQUIREMENTS
•
5 volt power cord and 3-AA Alkaline batteries power the weather station.
MANUALLY SET TIME: PROGRAM MENU
•
The SET button will move through the program menu.
•
The + or - button will adjust values.
•
Press the LIGHT button at any time to exit.
Program Menu:
•
Language (English, Español, Francais)
•
Beep On/Off
•
Atomic time signal (On/Off)
•
DST (Daylight Saving Time On/Off)
•
Time Zone
•
12/24 Hour time format
•
Hour
•
Minutes
•
Year
•
Month
•
Date
•
Fahrenheit/Celsius
•
Pressure units: InHg or hPa
•
Pressure number setting
The SET button will move through the program menu. To change a value use the + or -
button.
1.
Hold the SET button five seconds so that ENGLISH shows. Press and release the + or –
button to select a different language. Confirm with the SET button and move to the
beep sound, on or off.
2.
BEEP and the word ON will flash. Press and release the + or - button to turn this to OFF
to avoid beep sounds when pressing a button. Confirm with the SET button and move
to atomic time (WWVB ON/OFF).
