background image

 

 

Features 

  Atomic Clock: 7 Time Zones

AST, EST, CST, MST, PST, AKST, HAST 

  Calendar (Month/date, 2000-2099, Default Year 2010)   
  Time (hour/minute) 
  Indoor Temperature/Humidity 
  Wireless Outdoor Temperature/Humidity  
  °C/°F selectable 
  Alarm and snooze Function  
  Weather  Forecast: Sunny, Slightly Cloudy, Cloudy, Rain or Snowy 
  History chart for Pressure  
  Low Battery indicator: Main unit and Transmitter 
  Temperature and humidity trends 
  High/Low Daily records  
  Comfort indicator 
  250 major US cities sunrise/sunset  
  Clothing index 

  Low battery icon for forecast station and Transmitter 

  Sits on desktop or tabletop 

  308-1451 requires 3 "AA" Alkaline batteries (not included)  

  TX14TH requires 2 "AA" Alkaline batteries (not included)  

 

Initial Setup 

 
Note:  

The forecast station will display the fisherman icon, lines etc., 

before

 batteries are installed. These items 

are painted on the screen.

  

 

1.  Insert 3 AA batteries (not included) into the forecast station (

see Install Batteries in the Forecast Station).

 

The forecast station will light up and show, pressure, indoor temperature, humidity and channel 1.  
 

2.  Insert 2 new AA batteries into the transmitter, observing the correct polarity (

see Install Batteries in the 

Outdoor Transmitter

).   

Note:

 The CH switch is set to Channel 1 by default. Confirm channel 1 is selected. 

 

3.  Keep the transmitter 5-10 feet from the forecast station for 15 minutes to establish a good connection. 

 

4.  Within 3 minutes the forecast station will beep and the outdoor temperature will show. If the outdoor 

temperature does not show after 3 minutes remove power from the transmitter and the forecast station for 
60 seconds and start again from step 1.  

 
5.  If the outdoor temperature does not show up after a second attempt, please slide open the battery cover of 

the outdoor transmitter to reveal the TX button. Push down on the TX button for 3 seconds to send a 
wireless signal to the forecast station. 

 
6.  Hold the CH button on the forecast station to start the search for the transmitter signal. 
 
7.  For optimum 433 MHz transmission, the outdoor transmitter should be placed a distance of no more than 

200 feet (60 meters, open air) from the forecast station. 

 

Do Not Mix Old and New Batteries 

 

Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries 

 

WWVB Radio-controlled Time 

 
The NIST radio station, WWVB, is located in Ft. Collins, Colorado, and transmits the exact time signal 
continuously throughout the United States at 60 kHz. The signal can be received up to 2,000 miles away 
through the internal antenna in the forecast station

. However, due to the nature of the Earth’s Ionosphere, 

Summary of Contents for 308-1451



















Reviews: