background image

 

 

 

DST 

On 

Program Menu 

 
The 

SET 

button will moves through the items in the program menu. The 

or

 -

 

button will change these values. 

 

WWVB reception ON or OFF 

 

Time Zone (Seven Time Zones) 

 

Daylight Saving Indicator 

 

12/24 hour time format 

 

Fahrenheit/Celsius selection 

 

Manual time set (Hour, Minutes, Seconds) 

 

Calendar set (Year, Month, Date) 

 
WWVB Time Reception 
 
The WWVB time reception defaults to ON.  To turn the WWVB reception OFF:  

 

1.  Hold the SET button for 5 seconds. 
2. 

WWVB

 and 

ON

 will flash in the time display. 

3.  Press and release the 

or

 -

 button to turn this OFF. 

4.  Confirm with the SET button and move to the 

Time Zone

 
Time Zone 
 
This station offers seven time zones listed in letter format (default is EST): 

 

AST Atlantic Time 

 

EST Eastern Time 

 

CST Central Time 

 

MST Mountain Time 

 

PST Pacific Time 

 

AKT Alaskan Time 

 

HAT Hawaiian Time 

 

1. 

EST

 will flash next to the date. 

2.  Press and release the 

or

 -

 button to select a different Time Zone. 

3.  Confirm with the SET button and move to 

Daylight Saving Indicator

 

DST Indicator 
 
DST will default to the ON position as most of the country observes the DST change. The DST indicator should 
stay on all year so the forecast station knows when to switch into or out of daylight saving 
time. If you live in an area does not observe the DST change, switch this to the OFF 
position.  

 

1. 

DST

 and 

ON

 will flash in the time display.  

2.  Press and release the 

or

 -

 button to turn DST to OFF.      

3.  Confirm with the SET button and move to 

12/24 hour time format

 

12/24 Hour Time Format 
 
The time may be displayed in 12-hour or 24-hour format. Default is 12-hour time. 

Note:

 When in 12-hour format AM or PM will show in front of the hour.   

 

1. 

12Hr

 will flash in the time display. 

2.  Press and release the 

or

 -

 button to select 24-hour time.  

3.  Confirm with the SET button and move to 

Fahrenheit/Celsius

 

 

 

WWVB 

On 

 

TIME ZONE 

EST 

12Hr 

Summary of Contents for 308-1451



















Reviews: