La Crosse Technology, Ltd.
Page 5
Test a new set of alkaline batteries. Write down the date of installation and the voltage of the
batteries.
When the batteries fail, please note the date and voltage again.
Check the
and
between the outdoor sensor and weather station. Outdoor sensors
at the end of the range may work while batteries are fresh but not after they drain a bit.
Check for leaking batteries, which may damage the outdoor sensor.
Battery life is over 24 months when using reputable battery brands for both Alkaline and Lithium
batteries.
Replacement Outdoor Sensors
Visit your local Retailer or La Crosse Technology® Store
http://store.lacrossetechnology.com/
copy and paste this link to your browser address bar).
Note
: Be sure to order the correct model and frequency to avoid receiving the incorrect item.
Call La Crosse Technology® Store at
608-785-7939
or e-mail from our website if you are unsure
about the correct item to order. Each item carries the original new product warranty and includes
access to La Crosse Technology technical support.
Temperature Trend Arrows
The indoor and outdoor temperature trend indicators will update every 30 minutes or less. These trends
represent temperature changes over the past three hours.
UP ARROW: Temperature rose more than 2°F/1°C in the past three hours
RIGHT ARROW: Temperature has
not changed
more than 2°F/1°C in the past three hours
DOWN ARROW: Temperature fell more than 2°F/1°C in the past three hours
MIN/MAX Temperature readings
Explanation:
The weather station shows the daily minimum and maximum temperatures each day
starting at midnight (12:00 AM). The weather station automatically resets the MIN/MAX temperatures at
midnight (12:00 AM).
You can manually reset the MIN/MAX data at any time.
View MIN/MAX data:
Press and release the MAX/MIN button to view the Maximum, Minimum, then
Current Indoor and Outdoor Temperatures.
Multiple Transmitters:
Press and release the CH button to select the desired outdoor channel to
view the Minimum and Maximum Outdoor Temperatures. Press and release the MAX/MIN button to
view the Maximum, Minimum then Current Temperatures for that channel.
Reset all MIN/MAX data:
Hold the MAX/MIN button for 5 seconds and the Indoor and all Outdoor
Minimum and Maximum Temperatures may be reset manually to current temperatures.
Frost Alarm
FROST ALARM:
The Frost Alarm will sound when the outdoor temperature drops to 34°F (1.1°C).
ACTIVATE Press and release the TEMP ALERT button to activate the Frost Alarm on all channels
(when multiple transmitters in use). The Frost Alarm icon
will appear in the outdoor temperature
area when active.
DEACTIVATE Press and release the TEMP ALERT button until the Frost Alarm icon no longer
shows.
Temperature Alarms
Outdoor Temperature Alarms:
A high and low outdoor temperature alarm may be set on the forecast
station.
