Model: 308-2316 www.lacrossetechnology.com/support
Page | 14
39.Press the ALARM button to exit alarm settings.
Note:
There is only one time alarm. Set the time alarm in the high or low alarm setting mode.
Low Alarms:
1.
Press the ALARM button
once
to enter HI Alarm mode (
LOAL
will show in the date display).
Press the SET button to select the
Time Alarm
. The Hour will flash.
2.
Press the + or MIN/MAX buttons to adjust the hour.
3.
Press the SET button to select the
minutes.
The Minutes will flash.
4.
Press the + or MIN/MAX buttons to adjust the minutes.
5.
Press the ALARM button to activate or deactivate the alarm.
6.
Press the SET button to select the
Indoor Humidity
Low Alarm.
7.
Press the + or MIN/MAX buttons to adjust the humidity value.
8.
Press the ALARM button to activate or deactivate the alarm.
9.
Press the SET button to select the
Indoor Temperature
Low Alarm.
10.Press the + or MIN/MAX buttons to adjust the temperature value.
11.Press the ALARM button to activate or deactivate the alarm.
12.Press the SET button to select the
Outdoor Humidity
Low Alarm.
13.Press the + or MIN/MAX buttons to adjust the humidity value.
14.Press the ALARM button to activate or deactivate the alarm.
15.Press the SET button to select the
Outdoor Temperature
Low Alarm.
16.Press the + or MIN/MAX buttons to adjust the temperature value.
17.Press the ALARM button to activate or deactivate the alarm.
18.Press the SET button to select the
Wind Chill
Low Alarm.
19.Press the + or MIN/MAX buttons to adjust the wind chill value.
20.Press the ALARM button to activate or deactivate the alarm.
21.Press the SET button to select the
Dew Point
Low Alarm.
22.Press the + or MIN/MAX buttons to adjust the dew point value.
23.Press the ALARM button to activate or deactivate the alarm.
24.Press the SET button to select the
Pressure
Low Alarm.
25.Press the + or MIN/MAX buttons to adjust the pressure value.
26.Press the ALARM button to activate or deactivate the alarm.
27.Press the ALARM button to exit alarm settings.
Activate/Deactivate Hi and Low Alarms
1.
Press the ALARM button to enter HI Alarm
(HIAL)
or LO Alarm
(LOAL)
mode.
2.
Press the SET button to select an alarm value to change.
3.
With
alarm value flashing
, press the ALARM button to activate or deactivate
individual alarms.
4.
When active (ON) the alarm icon will show.
5.
When the alarm is inactive (OFF) the alarm icon will not show.
When an alarm sounds and flashes
Alarm will sound for two minutes.
Press any button to silence the alarm.
Active
Alarm
Icon
