La Crosse Technology, Ltd.
Page 3
TX144W Sensor:
1. Grab the vented portion of the sensor and turn counter clockwise.
2. Remove old batteries and install fresh “C” batteries.
3. Carefully align and turn vented portion clockwise to tighten.
4. Hold the WIND button on the weather station for 3 seconds to search for the
sensor.
TX141TH-BCH Sensor(s):
1. Slide battery cover down and lift off sensor.
2. Remove old batteries and install fresh “AA” batteries.
3. Hold the TEMP button on the weather station for 3 seconds to search for the
sensor.
If this fails to connect the sensor to the station, bring the sensor about five feet
from the station and complete a
POWER REQUIREMENTS
2-C batteries power the wind speed sensor
2-AA batteries for the thermos=hygro sensor
3-AAA Alkaline batteries for the wind speed station
COMPATIBLE SENSORS
TX144W Wind Speed
TX141TH-BCH can be added on channel 2 or channel 3 for additional
temperature/humidity readings.
The above 433MHz sensors will read to this wind speed station.
ADD-ON SENSORS
You can add up to two TX141TH-BCH* sensors for extra temp/humidity
readings on channels 2 or 3. (Wind Sensor uses channel 1).
1.
Remove the battery cover from all the sensors (leave battery covers off until all
sensors are received by the wind station).
2.
Set the first additional sensor to Channel 2 and insert 2 AA batteries.
3.
Set the second additional sensor to Channel 3 and insert 2 AA batteries.
4.
Hold the TEMP button on the wind station for 5 seconds to search for sensors.
5.
Press the TX button on each sensor.
6.
When connection is established, the temperature & humidity for each of the
selected channels will appear.
7.
Install the battery covers on each sensor.
8.
Keep sensors and the wind station 5-10 feet apart for 15 minutes to establish a
solid connection.
9.
After 15 minutes, place the remote sensors in appropriate shaded locations.
10.Press and release the -/CH button to view channels 1, 2 or 3 on the wind station
when multiple sensors are used.
*Additional sensors are sold separately & are available for purchase here:
www.lacrossetechnology.com/tx141th-bch-temperature-humidity-sensor
