background image

Page | 6

327-1417BW

Wind Speed Weather Station

• 

Wind speed chart will fill to current speed. 

   Current speed will blink.  

   Example: 15 mph wind will show filled sections to 

   10 mph, and 15 mph color segment will flash. 

• The units (MPH/KMH) are setup in the settings menu. 

Wind Speed Graph

Wind Readings

Wind History

Press and release the WIND button to view the maximum wind history values. 

• One Hour: past 60 minute period (default Top Speed record, already shown)

• 24 hour: Past 24 hour period, from last record

• 7 Days: Past 7-day period, from last record

 Month: Defined by Calendar Month i.e. January 1 - January 31 

 Year: Defined by Calendar Year i.e. January 1 - December 31

Note: 

After 5 seconds all readings default back to the 1 hour top wind speed.

Wind Speed:

 Highest speed in past 30 seconds

Top Wind Speed:

  Highest recorded wind speed in 

time interval.  Default is 1 hour, controlled by the 

Wind History feature, details below.  

Feels Like Temperature:

 

Wind Speed | Temperature | Humidity combined

• 

When outdoor temp is higher than 80˚F, displays 

   heat index 

• 

When outdoor temp is lower than 50˚F, displays 

   wind chill 

• When outside of the above ranges will display 

   current outdoor temperature.

24 Hours

7 Days

MPH

15 20

+

10

5

4

3

2

1

0

TOP WIND SPEED

15 20

+

10

5

4

3

2

1

0

MPH

TOP WIND SPEED

Summary of Contents for 327-1417BW



















Reviews: