background image

Page | 8

327-1417BW

Wind Speed Weather Station

Feels Like HI

Feels Like LO

Dew Point

Indoor Temp HI

Indoor Temp LO

Indoor Humidity HI

Indoor Humidity LO

15 20

+

10

5

4

3

2

1

0

INDOOR

15 20

+

10

5

4

3

2

1

0

INDOOR

15 20

+

10

5

4

3

2

1

0

INDOOR

15 20

+

10

5

4

3

2

1

0

INDOOR

15 20

+

10

5

4

3

2

1

0

FEELS LIKE

15 20

+

10

5

4

3

2

1

0

FEELS LIKE

15 20

+

10

5

4

3

2

1

0

OUTDOOR

Reset Temperature/Humidity Readings

:

• Press the TEMP button to view individual HI | LO readings. 

 Hold the MINUS button for five seconds to reset 

each individual

 value.

• Individual readings will reset to current temperature, humidity, etc.

Set Weather Alerts

• Hold the ALERTS button for 3 seconds to enter alert set mode. 

 High Wind Speed ON | OFF will flash.    

Alert ON: 

 

1.

 

Press the +/- buttons to arm the alert. 

2. Press the ALERTS button and the alert value will flash

3. Press the +/- buttons to set the alert value (Hold to set quickly).

4. Press ALERTS button to move to next alert.

          

Alert OFF: 

1. Alerts are OFF unless armed. If you do not wish to set an alert, simply press the 

    ALERTS button again to move to the next alert.

Alert OFF use +/- to arm (turn on)

Alert ON use +/- to set value

15 20

+

10

5

4

3

2

1

0

WIND SPEED

15 20

+

10

5

4

3

2

1

0

WIND SPEED

MPH

Summary of Contents for 327-1417BW



















Reviews: