La Crosse Technology, Ltd.
Page 2
Manually set time: Program Menu
............................................................................10
...........................................................................................11
Weather station is blank: No letters, numbers or dashed lines
BATTERIES
Half of all warranty issues can be resolved with fresh batteries of the appropriate
voltage.
We suggest name brand alkaline batteries.
Use batteries dated at least six years in advance of the current year. Batteries
dated earlier than six years from now may still work, but may be unstable in
performance.
Alkaline batteries manufactured this year will have an expiration date 10 years
in the future. Battery technology has improved and batteries will maintain
voltage longer in storage. However, the environment the batteries reside in for
the 10 years can deplete the power.
Good name brand alkaline batteries make less noise, which reduces the chance
of RF (radio frequency) interference from the battery compartment. A minimum
voltage of 1.48V for each battery is necessary for proper performance.
WEATHER STATION FACTORY RESTART
The factory reset will return the wind speed station to its default settings. This will
clear all previous recorded history, so you may want to write down data before
taking this step.
1.
Hold down both the WARNING and ALERTS button together for 5 second. This
will clear all recorded weather data and reset the station's settings back to
default
2.
The weather station will fully populate, clear all records, then return to a normal
display and search for outdoor sensors.
3.
While searching for the outdoor sensors the Wind Speed, and Outdoor
4.
Temperature/Humidity will show dashes.
5.
Once connected to the outdoor sensors (allow 3 minutes) the Wind Speed, and
6.
Temperature/Humidity will show current readings.
7.
In the absence of wind, this reading will show 0.00.
Dashes = Not connected to sensor
Zero or current readings = Connected to sensor.
BATTERY CHANGE
TX141Wv2 Sensor:
1. Grab the vented portion of the sensor and turn counter clockwise.
2. Remove old batteries and install fresh “C” batteries.
3. Carefully align and turn vented portion clockwise to tighten.
4. Hold the WIND button on the weather station for 3 seconds to search for the
sensor.
