background image

La Crosse Technology, Ltd.  

Page 8 

 

• Indoor LOW Humidity Value 10%RH to 99%RH 

• Indoor HIGH Humidity ON/OFF 

• Indoor HIGH Humidity Value 10%RH to 99%RH 

 

ACTIVE ALERT  

 

 

When armed alert value is reached, station will beep five times each minute, 

until it is out of alert range. 

 

The flashing alert icon will indicate which alert is sounding. 

 

Press any button to stop the alert sound. 

 

The alert icon will flash while value is in alert range. 

 

 

Disarm Alert: 

1. Hold the ALERTS button for 3 seconds to enter alert set mode. 

2. Press and release ALERTS button until you see the alert you wish to disarm. 

3. Press the + or - buttons to disarm the alert. 

4. Press the WARNING button to exit. 

 

FROST AND STORM WARNINGS  

 

1.

 

Hold the 

WARNING 

button for 3 seconds to view frost and storm warnings. 

2.

 

Press and release the 

or 

-/CH 

buttons to activate/deactivate frost and 

storm warnings. 

3.

 

Press and release the 

WARNING 

button to confirm and move to the next 

item. 

Note: 

The warning values are not programmable. You can only 

activate/deactivate the frost or storm warning. 

 

This station offers the option of active Frost and Storm alerts. 

 

Simply activate the alerts to use them. 

 

Note: 

When setting FROST alerts for channels two & three, user will select 

channel first (1, 2, 3) then select outdoor alert. FROST Alerts cannot be set 

for channel 2 & 3 if no additional sensors are connected. 

 

Frost Warning: 

 

When the outdoor temperature is between: 28 °F to 37 °F (-2 °C to 3 

°C), and the frost warning is active a Frost Warning will alert you with a 

flashing snowflake icon and the station will sound. 

 

Outside of this range, the frost warning is not active. 

 

Weather station will beep five times each minute, for 5 minutes. After 5 

minutes, the warning icon will flash until frost warning is out of range. 

 

Storm Warning: 

 

When the barometric pressure drops more than 2.5hPa in a 3 hours 

period, the storm warning will flash and the station will sound. 

 

The storm warning icon (alert triangle) will flash storm and storm icons 

(clouds, rain, lightning) will flash and sound for 1 minute. 

Summary of Contents for 327-1417BW













Reviews: